Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 18.191.154.119
Lock expires at: 2025/04/05 12:19 (9 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== ROI Analysis with LVis ======
===== The ROI Analysis in Detail – Mathematics=====
==== Gross ROI Counts ====
==== Net ROI counts & count rates ====
==== Uncertainty of the net area ====
==== Efficiency ====
==== Relative Uncertainty of the efficiency ====
==== Nuclide & method specific calibration factor  ====
==== Relative uncertainty of the nuclide & method specific calibration factor ====
==== Activity  ====
==== Uncertainty of the activity ====
==== Critical Level (Detection Threshold) ====
==== Detection Limit ====
===== Setup of a NaI Detector for ROI Analysis in LVis =====
==== Configuring the digiBase with MCB Properties and Maestro ====
==== Installing LVis & configuring the Detector ====
==== Configuring a new detector in LVis ====
==== Defining the QA Settings for a new ROI Detector ====
===== Defining ROIs =====
===== Calibrating the Detector for ROI Analysis =====
==== Defining Calibration Sources ====
==== Setting up the energy calibration parameters and performing an energy calibration ====
=== Setting up the energy calibration ===
=== Performing an energy calibration ===
==== Performing a gain stabilization check ====
==== Setting up the ROI efficiency calibration parameters ====
==== Performing an ROI efficiency calibration ====